Product Information

 About Stainless Steel?

What is Stainless Steel?

Stainless steel is a name of high alloy steel used mainly for its anti-corrosion properties. The main characteristic of the stainless steel family is that they all contain a minimum of 10.5 percent of chromium. This enables the steel to withstand corrosive atmospheres or erosive chemical environments. There are over 60 different grades of stainless steel that are divided into 5 different categories. Stainless steel is more expensive than carbon and alloy steel and only accounts for a small amount of steel used in the global market, but it is very valuable in the international market.

History of Stainless Steel

Sheffield, England born Harry Brearly discovered stainless steel in 1913. In an experiment, he found that steel's corrosion resistance increased when the chromium content is raised to 12 percent or more. He is seen as the person who laid the foundation for the development of various stainless steel grades. The development of stainless steel almost came to a complete standstill during the First World War. By the late 1920s, it was found that two grades of stainless steel namely martensitic stainless steel and austenitic stainless steel were the most versatile and useful. Martensitic stainless steel has a chromium content of between 13 and 18 percent while austenitic stainless steel contains 18 percent chromium and 8 percent nickel. In today's terms, stainless steel is used as a generic term to describe corrosion-resistant steel that has a minimum chromium capacity of 10.5 percent. The chromium creates a passive and self-renewing chromium oxide film around the steel at the atomic level and this prevents the iron from rusting.

What is Corrosion?

Stainless steel is susceptible to certain types of corrosion despite the fact that one of the main reasons for using stainless steel is its resistance to corrosion. The different kinds of corrosion affecting stainless steel are general corrosion, pitting corrosion, crevice corrosion, stress corrosion cracking, sulfide stress corrosion cracking, intergranular corrosion, galvanic corrosion and contact corrosion.

Corrosion in stainless steel occurs when the protective layer of Chromium Oxide (Cr2O3) is broken down. This can spread as microscopic or visibly spots over the surface of the steel.

Stainless Steel Categories?

Stainless steel is divided into 5 main categories. These are austenitic, martensitic, ferritic, duplex and precipitation hardening. 200 Series Austenitic – Alloys: 201, 202, 203, 204 & 205 is a chromium-nickel-manganese alloy with high strength in the annealed. This series is non-magnetic, not heat treatable and has excellent formability for severing forming applications. It is used in structural applications and for the manufacture of washing machine tubs.

300 Series Austenitic – Alloys: 301, 302, 303, 304, 305, 308, 309, 310, 314, 316, 317, 321, 330, 347, 384 is chromium-nickel alloy and its strength is developed by cold working. The series is non-magnetic, not heat treatable and has good formability. By adding molybdenum, the corrosion resistance is increased. It is used in food equipment, chemical equipment and architectural applications.

400 Series Ferritic – Alloys: 405, 409, 429, 430, 434, 436, 442, 446 is straight chromium alloy, magnetic but it is not heat treatable. This series is mainly used for automotive trim and cooking utensils.

400 Series Martensitic – Alloys: 403, 410, 414, 416, 420, 422, 431, 440 is straight chromium alloy, magnetic and can be hardened by heat treatment. It is used for fasteners, pump shafts and turbine blades.

Precipitation Hardening – Alloys: 13-8, 15-5, 15-7, 17-4, 17-7 is chromium-nickel, martensitic or austenitic. Develop strength by precipitation hardening reaction due to heat treatment. It is mainly used for valves, gears and petrochemical equipment.

Duplex – Alloys: 329, 2205, 2304, 2507, 3RE60 is chromium-nickel-molybdenum. This series is more resistant to stress corrosion cracking than austenitic and it is also tougher than fully ferritic alloys. It is mainly used in pipelines or pressure shafting.

Application

Stainless steel is a very versatile and useful material used in a wide variety of applications. It is used in the following fields:
Cutlery and kitchenware
Home appliance
Chemical processing and oil & gas industries
Power generation
Food production
Architecture, building and construction
Medical applications
Automotive parts

 Chemical Composition (For Reference)

ASTM Specification

Specification: ASTM A240

JIS Specification

Specification: JIS G4304 G4305 G4312